電纜橋架作為電力工程行業中備受歡迎的產品，電纜橋架在市場上的銷量一直處于一路的狀態，廠家在生產的時候要注意哪些事項呢？下面小編為您分析分析：

As a popular product in the power engineering industry, cable tray has always been in an advanced state of sales in the market. What should manufacturers pay attention to when producing cable tray? The following editor will analyze and analyze for you:

電纜橋架的四點性能

Four points of environmental protection performance of cable tray

1、成分內不含Ph、cr、Hg等重金屬；

1. The ingredients do not contain heavy metals such as Ph, Cr, Hg, etc;

2、歸屬于厚膜型材料，觸變性能好，經充分?jǐn)嚢韬?，少加或不加稀釋劑，即可涂裝施工。由于鍍鋅固體分含量高達77％，固線器，一次無氣噴涂可獲得較高的膜厚，減少了有機溶劑的揮發量，降低干燥能耗，這些均有利于環境保護。

2. It belongs to thick film material with good thixotropic property. After full mixing, with little or no diluent, coating can be carried out. Due to the high solid content of 77% in zinc plating, a higher film thickness can be obtained through a fixed wire device and a single airless spraying, reducing the volatilization of organic solvents and drying energy consumption, all of which are beneficial for environmental protection.

3、經過測試證明：絕大多數鍍鋅的溶劑和稀釋劑內不含甲苯、酮類、鹵代烴等毒性大的有機溶劑。

3. The test shows that most of the solvents and diluents for zinc plating do not contain toluene, ketones, haloalkane and other toxic organic solvents.

4、電纜橋架廠家電纜橋架是替代熱浸鍍鋅、電弧(熱)噴鋅的好材料，對減少三廢、降低能耗，提高環境保護的社會效益的作用就更加明顯。

4. The cable tray manufacturer cable tray is a good material to replace hot-dip galvanizing and arc (hot) zinc spraying, which plays a more obvious role in reducing the three wastes, reducing energy consumption and improving the social benefits of environmental protection.

此外山東電纜橋架是以金屬為主要原材料進行加工制作的，因此工人在生產中要注意佩戴手套，防止被金屬割傷；有條件的廠家好為工人配備護目鏡和工作服，這樣對工人的保護更。橋架的生產大多是按照設計圖紙和客戶要求進行加工制作，所以生產前要仔細閱讀圖紙，按照要求調整生產設備上的數值，防止出現尺寸等不合格的產品出現。

In addition, cable tray in Shandong is processed and manufactured with metal as the main raw material, so workers should pay attention to wearing gloves in production to prevent being cut by metal; Manufacturers with conditions are better equipped with goggles and work clothes for workers, which provides more comprehensive protection for workers. The production of cable trays is mostly based on the design drawings and customer requirements, so it is necessary to carefully read the drawings before production, adjust the values on the production equipment according to the requirements, and prevent the occurrence of unqualified products such as dimensions.

在電纜橋架的加工制作過程中，除了對工人有要求外，生產設備也是注意事項之一。電纜橋架廠家用電是任何生產都要特別注意的事項，生產設備的線路也屬于用電的范圍，啟動機器前好進行徹底檢查，尤其是隔段時間沒有使用的設備，更要注意其開關和線路。更多相關內容就來我們網站http://www.zrbg1.com咨詢！

In the process of processing and manufacturing cable tray, in addition to the requirements for workers, production equipment is also one of the precautions. The electrical safety of cable tray manufacturers should be paid special attention to in any production. The line safety of production equipment also belongs to the scope of electrical safety. Thorough inspection should be carried out before starting the machine, especially for the equipment that has not been used in intervals, attention should be paid to the safety of its switches and lines. For more related content, come to our website http://www.zrbg1.com consulting service